VMX1100 Ultra-fine Vertical Mill – 100,000t/year calcium oxide powder project of Heshan

The project owner has rich and high quality limestone resources, which can be great material of calcium oxide producing. The calcium oxide micro powder of the project majority applied in paint filter, environmental emulsion paint, waterproof putty and sewage treatment fields. The factory of customer was equipped with 1 set of VMX1100 Ultra-fine Vertical Mill. The Ball Mill is used to produce 325-1000 mesh D97 calcium oxide powder, and the capacity can reach 6t/h.

Production Status:

Type & quantity: 1 set of VMX1100 Ultra-fine Vertical Mill
Material: calcium oxide
Product fineness: 325-1000 mesh
Capacity: 325 mesh D97 15-18t/h; 600 mesh D97 10-12t/h; 800 mesh D97 8-10t/h

HC1700 Grinding Mill – 60000t/year pyrophyllite powder project of Fuzhou public company

The customer enterprise is a professional supplier of pyrophyllite and kaolin powder in Asian-Pacific region, capturing 80% of market share in China, and has a total capacity of 600 million RMB. It has several wholly-owned subsidiaries in China. In 2011, a new production line was constructed in Chongqing. The customer purchased 2 sets of HC1700 Grinding Mill for the production line. HC1700 applied in pyrophyllite powder processing, the product has balanced fineness and high quality, the equipment operates steady.

Production Status:

Type & quantity: 2 sets of HC1700
Material: pyrophyllite
Product fineness: 325 mesh D99.9
Capacity: 6-8t/h

HC1000 Grinding Mill – 20,000t/year pharmaceutical grade talc powder project in Guilin

The talc enterprise is one of the largest in China. Pharmaceutical grade talc powder processing has high requirement of Raymond Mill equipment. we produces high quality Grinding Mills and provides good service, repeatedly transform the equipment for the customer to offer a better performance, and our product and service are accepted by the customer.

Production Status:

Type & quantity: 2 sets of HC1000
Material: talc
Capacity: 400 mesh D99 2.5-3t
325 mesh D99 4.5-5t

HC2000 Large Grinding Mill & Industrial Pulse Dust Collector – Zhejiang 500,000t/year Limestone Powder Processing Project

The large enterprise in Zhejiang Changxing purchased one set of HC2000 Large Grinding Mill equipment at the beginning of 2012. Up to now, the equipment operates steady with low failure rate, the high capacity and low energy consumption brought huge benefit for the enterprise owner. The owner is satisfied with the quality and performance of HC2000 Powder Mill, as well as our service. Changxing is a famous calcium carbonate production base in China. After the resources integration, all calcium carbonate enterprises replace the old equipment to large-scale, energy saving and environmental friendly Raymond Mill equipment. At present, over 90% of Changxing powder processing enterprises applied Hongcheng grinding mills.

Production Status:

Type & quantity: 1 set of HC2000 with Industrial Pulse Dust Collector
Material: calcium carbonate
Product fineness: 250 mesh D97
Capacity: 40t/h

HC1700 Grinding Mill – 1,000,000t/year power plant desulfuration project in Yunfu chemical enterprise

The enterprise invested 120 million RMB to construct powder processing industrial zone with a capacity of 1.5 million tons per year, including calcium carbonate micro powder, calcium carbide powder and desulfuration lime powder producing projects. The industrial zone covers an area of over 40000m³ and was equipped with 12 sets of national advanced Raymond Mills, 6 sets of 400-2500 mesh Ultra-fine Mills. At the same time, the industrial zone has 8 limestone raw material warehouses with a volume of 5000 tons, 6 sets of 2000 ton bulk powder tanks, warehouse with a volume of 3000 tons of packed product.

Production Status:

Type & quantity: 8 sets of HC1700 Grinding Mills
Material: limestone
Product fineness: 325 mesh D96
Capacity: 14-16t/h

HC1700 Grinding Mill – 200,000t/year desulfuration project of Hubei power plant

Hubei has large sum of power plants. Along with the infrastructure construction and power industry development, the pressure of environment protection will be higher. Apply Raymond Mill for lime powder desulfuration is a frequently-used technology. The customer purchased HC1700 Grinding Mill for limestone processing and applied the lime powder desulfuration technology.

Production Status:

Type & quantity: 2 sets of HC1700
Material: limestone
Product fineness: 325 mesh D90
Capacity: 14-15t/h

HC1700 Grinding Mill – Heilongjiang power plant desulfuration project

The enterprise in Heilongjiang has numerous industries, one of the important project is the power plant desulfuration project. The quality requirement of Grinding Machinery will be very high for there are lots of low temperature days. After discussions and improvements, the customer selected the HC1700 Grinding Mill for limestone processing. The Powder Making Machine start operating in 2013. The Raymond Mill operates steady and is able to full fill the requirement of customer.

Production Status:

Type & quantity: 1 set of HC1700
Material: limestone
Product fineness: 250 mesh D97
Capacity: 12-16t/h

HC1700 Grinding Mill – 150,000 t/year power plant desulfuration project of Hubei calcium enterprise

The calcium enterprise is the largest metallurgical ash manufacturer with 1,000,000t capacity of limestone processing of township enterprise in China, it is also the direct supplier of some large enterprise like Wuhan Iron and Steel Corp. ,Hubei Xinyegang Steel Co Ltd., Xinxing Pipes, etc. The enterprise owner purchased 2 sets of HC1700 and 2 sets of 4R equipment. Till today, the equipment operates steady and had brought large benefit for the owner.

Production Status:

Type & quantity: 2 sets of HC1700
Material: limestone
Fineness: 325 mesh D96
Capacity: 10t/h

HM1395 Ultrafine Mill – 60,000t/year coarse whiting micro powder project in Hunan China

Project Status He customer owned the calcite mine, majority process coarse whiting fine powder. The customer’s site has 1 set of HM1300 Grinding Mill for 400 mesh D97 coarse powder producing, 1 set of HM980 and 1 set of HCH1395 Ultra-fine Mill for 800-1500 mesh D97 powder.

Production Status:

Type & quantity: 1 set of HM1395 and 1 set of HM980
Material: Coarse Whiting Powder
Product Fineness: 1250 Mesh, D97
Capacity: HCH1395: 5.5-6 TPH, HCH980: 2.5-3 TPH

VMX1100 Vertical Mill – 100,000t/year ultra-fine calcium carbonate project of Guangxi powder enterprise

The project is for a leading enterprise of coarse whiting processing. The customer has friendly relationship and cooperation with we for more than 10 years. During the years of development of Powder Processing Mills, the requirement to the equipment is increasing along with the development of enterprises. The customer chooses the growing and innovating we as the equipment supplier. This time, the customer is going to extend the production line again. For the high requirement and short delivery time, the customer selected VMX1100 Table Mill. The main mill delivered punctually in five days, the whole Grinding Mill delivered in only a month. The equipment offers a higher efficiency for the production line and brings more benefit for the customer.

Production Status:

Type & quantity: 1 set of VMX1100
>Material: calcium carbonate
>Fineness: 600 mesh D97
Capacity: 4-14t/h

HM1395 Ultra-fine Mills – 120,000t/year coarse whiting ultra-fine powder project in Guangdong

The customer is a famous enterprise in coarse whiting industry. The project is for new constructed workshop. The customer has high requirement of environmental performance, capacity and energy cost. After several investments and comparisons, the customer finally selected 2 sets of HM1395 Ultra-fine Mills. The Grinding Mills start operation in 2014.

Production Status:

Type & quantity: 2 sets of HM1395
Material: coarse whiting
Product fineness: 1250 mesh D97
Capacity: 5.5-6t/h

HM1395 Ultra-fine Mill – 100,000t/year calcium carbonate project of Guilin chemical enterprise

The enterprise rank the top of national calcium carbonate enterprises. The enterprise owned high quality limestone resource for the capacity of over 200 years. The project majority produces ultra-fine calcium carbonate powder. After several discussing and investigation, the enterprise owner selected Hongcheng HCH1395 Ultra-fine Mill. The Grinding Mill was installed in 2014. At present, the Ultra-fine Powder Mill operates steady, the customer is very satisfied with the capacity and fineness. The enterprise rank the top of national calcium carbonate enterprises. The enterprise owned high quality limestone resource for the capacity of over 200 years. The project majority produces ultra-fine calcium carbonate powder. After several discussing and investigation, the enterprise owner selected Hongcheng HM1395 Ultra-fine Mill. The Grinding Mill was installed in 2014. At present, the Ultra-fine Powder Mill operates steady, the customer is very satisfied with the capacity and fineness.

Production Status:

Type & quantity: 2 sets of HM1395
Material: calcium carbonate
Fineness: 800 mesh D97
Capacity: 6-8t/h

YGM160 high pressure medium speed grinder site in Indonesia

High Pressure Medium Speed Grinder is a new type of grinding equipment which a design institute in our company devote themselves to developing and producing on the basis of being engaged in the study of fine mill equipment for many years. It creates a new era of high efficiency and low energy consumption in international industrial milling field.

Production Status:

Purchased equipment: : YGM160 high pressure medium speed grinder
Material for processing: : limestone
The fineness of the material: : 200 meshes

HGM80 three-ring grinder site

HGM80 three-ring medium speed micro powder grinder can process talcum into 800 meshes used for papermaking filler. The fineness is even and through sieving rate is about 95%, which is very satisfied for the customers.

Production Status:

Purchased equipment: : HGM80 three-ring grinder
Material for processing: : talcum
The fineness of the material: : 800 meshes

YGM130 coal powder production line site

Main coal powder production equipment in this project is a star product of our company -YGM130 high-pressure medium speed mill. Fineness of finished powder is even, which increases combustion efficiency in coal powder boilers, raises production and reduces the pollutant emissions.

Production Status:

Purchased equipment: : YGM130 high pressure medium speed mill
Material for processing: : coal powder
The fineness of the material: : 200 meshes

High Pressure Micro-powder Grinder production site in Lebano

YGM high-pressure micro powder mill is called micro powder mill for short and also called superfine mill. Our experts in our company absorb fineness classification technology from Japan and Germany and resolve the difficulties of classification on the basis of producing industrial mill for many years.

Production Status:

Purchased equipment : High Pressure Micro-powder Grinder
Material for processing: : quartz
The fineness of the material: : 800 meshes

Four YGM130 high pressure medium speed grinders site

This customer is a large local barite powder grinding processing enterprise. In order to achieve mass production, this customer bought from our company four YGM130 high pressure medium speed grinders for barite powder grinding for once.

Production Status:

Purchased equipment: : YGM130 high pressure medium speed grinder
Material for processing: : barite
The fineness of the material: : 200 meshes

Hematite ball mill production site

According to users’ actual production capacity requirements, the ball mill equipment allocated by our company can meet 60-70 tons finished product demand per hour. Various technical indicators are in line with the requirements at the beginning of mill plant and the quality of products is completely up to standard.

Production Status:

Purchased equipment: : ball mill
Material for processing: : Hematite
The fineness of the material: : 300 meshes

Bauxite ball mill production site

This customer purchased ball mill equipments from EMCC for bauxite powder making. In the past one year, we reacted quickly to the replacement of parts and resolved customer’s urgent problems.

Production Status:

Purchased equipment: : ball mill, ball mill
Material for processing: : bauxite
The fineness of the material: : 600 meshes

Cement raw material ball mill processing field

The cement plant cooperated with us in 2011 and purchased our jaw crusher. Small type ball mill equipment grinds raw material for fine processing.

Production Status:

Purchased equipment: : ball mill, ball mill
Material for processing: : Cement raw material
The fineness of the material: : 350 meshes

Calcium Carbonate production line in Mexico

The customer worked in a mining company have a project for calcium carbonate processing production in Mexico. Our company according to their demand design a complete grinding mill production line, and to provide equipment for the installation, also provides a series of maintenance and service projects.

Production Status:

Country: : Mexico
Equipment: : YGM130 grinding mill
Raw Material: : calcium carbonate
Output Size: : 200 mesh, 95%through sieve rate
Working time: : 22~24 hours

Φ2700×3600 ball mill in South Africa

We met in exhibition, he was very happy with our technology after discussing on the exhibition, then he visited our customers’ sites in South Africa, he was satisfied with our quality, bought the ball mill from us for his gold dressing project.

Production Status:

Country: : South Africa
Equipment: : Φ2700×3600 ball mill
Raw Material: : Gold ore
Working time: : 24 hours

Limestone Production Line In Saudi Arabia

The customer get a contact information of us, then came to us and visited some of our grinding mill operation site in our domestic market, after a long time negotiation, he think our YGMX130 grinding mill is the best choice.

Production Status:

Country: : Saudi Arabia, Saudi Arabia
Equipment: : YGMX130 grinding mill
Raw Material: : limestone
Output Size: : 75 micron

Calcium Carbonate Production Line In Indonesia

A mining company in Indonesia contacted with us, their company plan to build a calcium carbonate factory. Our company according to their requires and configure a set of production line for them．

Production Status:

Country: : Indonesia
Equipment: : YGM130
Raw Material: : Calcium carbonate
Output Size: : 325 mesh, 95% through sieve rate
Working time: : 22~24 hours

Limestone Production Line in Colombia

In recent years, a lot of customers from Colombia bought mining equipment. The Chinese famous mining equipments manufacturers has lots of clients in Colombia, Good public praise successfully open the local market.

Production Status:

Country: : Colombia
Equipment: : YGM130 grinding mill
Raw Material: : Limestone
Output Size: : 200 mesh, 95%through sieve rate
Working time: : 22 hours